Steps on How to Setup and Install a Surround Sound Correctly

In order to test the quality of a surround sound, make sure that it is properly installed. However, correct setup must also be ensured by following the basics of surround assembly.

Surround sound is a technology that makes use of auxiliary speakers to enhance recreation of sound waves. From the word surround itself, it simply means to encircle all areas of the room with individual speakers whose purpose is to create a 3 dimensional audio effect. This is the new technology used by many home theaters and cinemas to deceive the senses; thereby, creating an illusive impression. However, the listener will only enjoy an incredible sound mixing if and when the surround sound is properly setup and installed. Below are the basic tips on how to assemble and arrange speakers the right way.

Center

The center speaker serves as the receiver of all sound waves transmitted, which are to be mixed and reproduced.

Front and sides

In a usual setup, you can find at least 2 separate speakers positioned in front, but on the left and right sides of the room. This will widen the extent of presence, which in turn amplifies the sound.

Rear and sides

For a balance production of sound, equivalent speakers are placed at the rear sides for a more steady and solid output.

Although not necessary, you have the option to add supplemental channels at the sides as well as subwoofers for a more refined effect. This will distribute the sound evenly within the 4 corners of the room making it more real and crisp. Once you have everything in proper order, you may now start with the installation, which may take the following order:

Remove current audio software

Before you proceed with the installation, you need to remove your existing audio software. Since the presence of various programs in one PC at the same time may sometimes cause technical problems, it is imperative to uninstall them prior to having a new one. The sound card may be replaced; however, this is optional depending on your preference. If not, you can also make use of external processor since it is a lot convenient on the part of the users.

Connect all cables

Make sure that every cable is connected to its proper place to ensure that it is working correctly because invalid connection can result to absence of sound.

Proceed with the installation

Just like any other ordinary software driver, installation is as simple as one, two, and three. Within few seconds you can now enjoy endless gratification for the whole family. However, always refer to the installation procedure to ensure that it is properly done.

Since speakers come in large number of choices, make sure that compatibility of sound system is taken into consideration.